Test all the manufacturers of common rail injector
Test all the manufacturers of piezo injector
Test all the manufacturers of common rail pump
Test DENSO HP0 pump
Test CAT common rail (HEUI) injector
Test CAT common rail (HEUI) engine oil pump
Test CAT 320D common rail pump (the world's first successful development)
Tel:+86-13375386268
Email: beacon@beacon-machine.com
Diesel Fuel Injection Pump Calibration Machine CR919 Common Rail EUI EUP HEUI Injector Pump Test Bench
FUNCTION CHARACTERISTIC:
1.Test all the manufacturers of common rail injector
2.Test all the manufacturers of piezo injector
3.Test all the manufacturers of common rail pump
4.Test DENSO HP0 pump
5.Test CAT common rail (HEUI) injector
6.Test CAT common rail (HEUI) engine oil pump
7.Test CAT 320D common rail pump (the world's first successful development)
8.Test EUI/EUP (can adjust the lift but not to change the camshaft)
9.Test VP44 VE VP37 pump optional function
10.Test RED3 RED4 TICS ZEXEL electronic control pump optional function
11.Drive circuit board(solenold valve electric parameters to enhance the voltage current,time,pull in voltage ,current,time,keep
voltage ,current,time,according to the setting of parameters of production factory)
12.Accept the speed sensor ,encode signal,high speed solenoid valve drive signal.Accept the speed sensor ,encoder signal,output 2
PWM drive signal, 2 way solenoid valve drive signal,1 high speed solenoid valve drive signal.
Driving signal waveform can be programed.
1. Operating environment, conditions and specifications of rail injector test bench:
Temperature (operating): -10 to 50°C (14 to 122°F)
Temperature (non-operating): -20 to 70°C (-4 to 158°F)
Relative humidity (running): 15% to 95% at 40 ℃ (no frost)
Relative humidity (non-operating): 90% at 65°C (non-condensing)
2. Technical parameters:
Mainframe nominal power (kW): 15KW
Overall size (cm): 225×142×218
Weight (KG): 1250KG
